CableJog to launch versatile audio cable testers

At Plasa 2004 stand JJ30 CableJog launches the AudioJog Pro hend held dio cable tester and AudioJog Rack 19" rack mount cable tester. The AudioJog Rack features test connections for 3 Pole XLR male and female, 6.35mm jack stereo or mono, single or twin 4.4mm Bantam stereo or mono, 3.5mm jack stereo or mono, 4 pole Speakon, DIN 180 3 and 5 pole, RCA phono and BNC. There are 2 rows of 6 LEDs corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LEDs also show the possibility of high resistance or leakage connections. There are 3 LEDs indicating the state of the memory option. If the Memory LED is on, then AudioJoG Rack automatically scans all the connections and compares against information held with just one press of the test button. Test modes are 'Double Ended' with both ends of the cable under test plugged into AudioJoG Rack or 'Single Ended' with one end of the cable under test plugged into AudioJoG Rack and the other into another AudioJoG Rack or the small hand held AudioJoG Pro.. Tests include continuity and short circuits, less than 255K {75K} ohms, Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.

The AudioJog hand held model provides the same features as the rack model and runs on a 9 V battery.